Computing/NUT - Revision history

Cricalix at 17:17, 2 April 2026

2026-04-02T17:17:05Z

← Older revision		Revision as of 17:17, 2 April 2026
Line 3:		Line 3:
	=== Installation ===		=== Installation ===
	<syntaxhighlight lang="bash">		<syntaxhighlight lang="bash">
	~~apt~~ install nut ~~nut-monitor~~		dnf install nut
	</syntaxhighlight>		</syntaxhighlight>

Cricalix at 17:16, 2 April 2026

2026-04-02T17:16:48Z

← Older revision		Revision as of 17:16, 2 April 2026
Line 7:		Line 7:

	=== Configuration ===		=== Configuration ===
	For the Eaton Pro UPS, '''/etc/~~nut~~/ups.conf'''<syntaxhighlight lang="ini">		For the Eaton Pro UPS, '''/etc/ups/ups.conf'''<syntaxhighlight lang="ini">
	[eaton650]		[eaton650]
	driver = "usbhid-ups"		driver = "usbhid-ups"
	port = "auto"		port = "auto"
	~~vendorid = "0463"~~
	~~productid = "FFFF"~~
	~~vendor = "EATON"~~
	~~bus = "005"~~
	~~</syntaxhighlight>Vendorid/productid/vendor/bus are not critical for single use case.~~

	~~Then~~ '''/etc/~~nut~~/upsd.conf'''<syntaxhighlight lang="bash">		</syntaxhighlight>'''/etc/ups/upsd.conf'''<syntaxhighlight lang="bash">
	LISTEN ~~127.0.0.1~~ 3493		LISTEN * 3493
	~~LISTEN ::1 3493~~
	</syntaxhighlight>~~And finally~~, ~~'''/etc/~~nut/~~nut.conf'''~~<syntaxhighlight>		</syntaxhighlight>All other files were left at defaults from the RPM installs, bar this detritus from a polkit adventure - it may or may not still apply<syntaxhighlight>
	MODE=~~standalone~~		polkit.addRule(function(action, subject) {
			if (action.id == "org.freedesktop.systemd1.manage-units" &&
			subject.user == "nut") {
			return polkit.Result.YES;
			}
			});

			</syntaxhighlight>

			=== udev ===
			<syntaxhighlight>
			ATTR{idVendor}=="0463", ATTR{idProduct}=="ffff", MODE="664", GROUP="nut"

	</syntaxhighlight>		</syntaxhighlight>

	=== Runtime ===		== Runtime ==
	<syntaxhighlight>		<syntaxhighlight>
	systemctl start nut-server		systemctl start nut-server
	</syntaxhighlight>The script behind nut-server will spin up new systemctl services to handle the UPS.		</syntaxhighlight>The script behind nut-server will spin up new systemctl services to handle the UPS.

	~~NUT Monitor can be run to get a graphical interface to the UPS status.~~		== Troubleshooting ==
			Previous attempts got stuck on custom UPS definitions in systemd, with permissions not setting up correctly etc. Ended up blowing everything away and restarting from scratch with the NUT enumerator approach.
	~~Using NUT will disable KDE's ability to communicate with the UPS and show the state of charge.~~

	==~~= Alternate installation =~~==
	~~Set MODE=netclient~~ in /etc~~/nut/nut~~.~~conf~~

	~~No entry in /etc/nut/ups~~.~~conf~~

	~~Add a MONITOR ups@synologyip 0 monuser secret secondary to upsmon.conf~~

	~~Set MINSUPPLIES to 0 in upsmon.conf~~

	~~systemctl restart nut-monitor~~

Cricalix at 12:10, 17 March 2024

2024-03-17T12:10:05Z

← Older revision		Revision as of 12:10, 17 March 2024
Line 32:		Line 32:

	Using NUT will disable KDE's ability to communicate with the UPS and show the state of charge.		Using NUT will disable KDE's ability to communicate with the UPS and show the state of charge.

			=== Alternate installation ===
			Set MODE=netclient in /etc/nut/nut.conf

			No entry in /etc/nut/ups.conf

			Add a MONITOR ups@synologyip 0 monuser secret secondary to upsmon.conf

			Set MINSUPPLIES to 0 in upsmon.conf

			systemctl restart nut-monitor

Cricalix at 07:02, 6 September 2023

2023-09-06T07:02:07Z

← Older revision		Revision as of 07:02, 6 September 2023
Line 30:		Line 30:

	NUT Monitor can be run to get a graphical interface to the UPS status.		NUT Monitor can be run to get a graphical interface to the UPS status.

			Using NUT will disable KDE's ability to communicate with the UPS and show the state of charge.

Cricalix at 06:58, 6 September 2023

2023-09-06T06:58:30Z

← Older revision		Revision as of 06:58, 6 September 2023
Line 20:		Line 20:
	LISTEN 127.0.0.1 3493		LISTEN 127.0.0.1 3493
	LISTEN ::1 3493		LISTEN ::1 3493
	</syntaxhighlight>And finally, /etc/nut/nut.conf<syntaxhighlight>		</syntaxhighlight>And finally, '''/etc/nut/nut.conf'''<syntaxhighlight>
	MODE=standalone		MODE=standalone
	</syntaxhighlight>		</syntaxhighlight>

Cricalix: Created page with "== Network UPS == === Installation === apt install nut nut-monitor === Configuration === For the Eaton Pro UPS, '''/etc/nut/ups.conf''' [eaton650] driver = "usbhid-ups" port = "auto" vendorid = "0463" productid = "FFFF" vendor = "EATON" bus = "005" Vendorid/productid/vendor/bus are not critical for single use case. Then '''/etc..."

2023-09-06T06:58:12Z

Created page with "== Network UPS == === Installation === <syntaxhighlight lang="bash"> apt install nut nut-monitor </syntaxhighlight> === Configuration === For the Eaton Pro UPS, '''/etc/nut/ups.conf'''<syntaxhighlight lang="ini"> [eaton650] driver = "usbhid-ups" port = "auto" vendorid = "0463" productid = "FFFF" vendor = "EATON" bus = "005" </syntaxhighlight>Vendorid/productid/vendor/bus are not critical for single use case. Then '''/etc..."

New page

== Network UPS ==

=== Installation ===
<syntaxhighlight lang="bash">
apt install nut nut-monitor
</syntaxhighlight>

=== Configuration ===
For the Eaton Pro UPS, '''/etc/nut/ups.conf'''<syntaxhighlight lang="ini">
[eaton650]
driver = "usbhid-ups"
port = "auto"
vendorid = "0463"
productid = "FFFF"
vendor = "EATON"
bus = "005"
</syntaxhighlight>Vendorid/productid/vendor/bus are not critical for single use case.

Then '''/etc/nut/upsd.conf'''<syntaxhighlight lang="bash">
LISTEN 127.0.0.1 3493
LISTEN ::1 3493
</syntaxhighlight>And finally, /etc/nut/nut.conf<syntaxhighlight>
MODE=standalone
</syntaxhighlight>

=== Runtime ===
<syntaxhighlight>
systemctl start nut-server
</syntaxhighlight>The script behind nut-server will spin up new systemctl services to handle the UPS.

NUT Monitor can be run to get a graphical interface to the UPS status.