Blue Opal/Engine: Difference between revisions
From Cricalix.Net
(Created page with "Notes for the engine. == Tools == {| class="wikitable" |+ !Area !Item !Fixing !Driver |- |Engine |Alternator |Top bolt |14mm |- | | |Bottom bolt |12mm |- | | |Swing bolt |12mm |- | |Water Pump |Top bolt |12mm |- | | |Bottom bolt |12mm |} == Starter Solenoid == To solve a starting issue, an automotive relay was installed. The correct relay will have four terminals numbered 85, 86, 30 and 87. <blockquote> Make up a length of cable from the large screw on the solenoid (...") |
No edit summary |
||
| Line 47: | Line 47: | ||
</blockquote> | </blockquote> | ||
-- https://www.cricalix.net/2023/05/13/relaying-a-solenoid/ | -- https://www.cricalix.net/2023/05/13/relaying-a-solenoid/ | ||
[[Category:Blue Opal]] | |||
Revision as of 17:56, 3 September 2023
Notes for the engine.
Tools
| Area | Item | Fixing | Driver |
|---|---|---|---|
| Engine | Alternator | Top bolt | 14mm |
| Bottom bolt | 12mm | ||
| Swing bolt | 12mm | ||
| Water Pump | Top bolt | 12mm | |
| Bottom bolt | 12mm |
Starter Solenoid
To solve a starting issue, an automotive relay was installed. The correct relay will have four terminals numbered 85, 86, 30 and 87.
Make up a length of cable from the large screw on the solenoid (battery cable terminal) and connect this to #30. Remove white cable from small solenoid terminal and connect to #85.
Make up cable from #86 connect to engine block. Connect #87 to small terminal on the solenoid.
Terminals #85 & #86 actuate the relay and #30 & #87 power the solenoid.
