Home Automation/NUT

Installation - Direct Connect

1. Install the add-on for NUT
2. Configure a username and password
3. Set instcmds to ALL
4. Set actions to SET
5. Add a device, name myups, driver usbhid-ups, port auto, config []
6. Mode is netserver
7. Disable shutdown_host, because HA is running on a Pi
8. Start the add-on
9. Check the logs

Integration - Direct Connect

1. Install the integration for NUT
2. It should auto-detect the NUT add-on

Installation - Network Connect to Synology

• Connect UPS to Synology device
• Enable network access on the Synology UPS page
• Add the IP of the HA box and apply
• Add the NUT integration on HA (ignore the pre-detected one if it doesn't offer a hostname to connect to)
• Hostname is the name/ip of the Synology device
• User is monuser
• Password is secret
• Done.